For Flowable Products.Controlled Dispensing.
Spout Pouch is a stand-up flexible packaging solution designed for liquids, semi-flowable products and certain powders where technically suitable, combining a spout with a reclosable cap for convenient use.
Spout position, cap type, pouch dimensions, film and lamination structure, barrier level and print design can be engineered according to product and filling requirements.
Stand-Up Pouch Format.
Controlled Opening and Closing.
Spout Pouch combines the classic stand-up pouch format with a spout and cap system. This creates a functional structure that can support controlled dispensing and allow the package to be closed again after use.
The cap system allows the package to be closed again for products intended for multiple uses.
The bottom-gusset structure supports an upright shelf presentation under suitable filling conditions.
Film and lamination structures can be selected according to the product’s required protection against moisture, oxygen, light and other external factors.
The pouch surface can be produced with custom printing aligned with the brand design or unprinted according to project requirements.
Spout Systems Positioned for the Intended Use.
Spout and cap selection is more than a visual detail. Product flow characteristics, filling method, consumption pattern and pouch dimensions should be evaluated together.
Side / Corner Spout
A spout positioned near the upper corner of the pouch can be considered for controlled pouring and dispensing applications.
Top Spout
A top-center or other suitable upper position can be selected according to product and filling requirements.
Cap Options
Cap and spout dimensions can be defined according to product viscosity, intended use and technical project parameters.
A Functional Link Between Product, Package and User.
Spout Pouch performance depends not only on the pouch format, but on designing the spout system and film structure together to suit the product and filling process.
Reclosing
The cap system can provide an open-and-close function for products that are not consumed in a single use.
Controlled Dispensing
Spout geometry and product flow characteristics can be evaluated together to configure the dispensing experience.
Multilayer Structure
Different film and lamination combinations can be considered according to the protection level required by the product.
Custom Printing
The pouch surface can be customized with graphic design and printing applications that reflect the brand identity.
The Right Spout Pouch Starts with the Product.
Product characteristics, filling method and usage scenario are evaluated together to define the package’s core technical structure.
Product Analysis
Viscosity, contents and protection requirements are evaluated.
Spout & Cap
Position, diameter and cap structure are considered according to the intended use.
Film & Size
Pouch dimensions and the film and lamination structure are defined for each project.
Filling Compatibility
The final structure is validated against the filling method and process conditions to be used.
Suitable for Flowable Products Requiring Controlled Dispensing.
Spout Pouch can be considered for various product groups; final material, spout and filling compatibility should be technically validated for each product.
Sauces & Purées
Sauces, purées and similar food applications with suitable flow characteristics.
Liquid Foods
Liquid food projects where product and process compatibility has been validated.
Cosmetics & Personal Care
A flexible packaging alternative for suitable personal-care and cosmetic products.
Cleaning Products
Suitable product applications where chemical compatibility has been technically validated.
Powdered Products
Selected powdered-product projects where product flow and spout structure are suitable.
Supplements & Blends
Suitable blend applications where product-film compatibility has been validated.
Industrial Products
Suitable industrial applications developed according to technical requirements.
Other Applications
Project-specific solutions based on product, filling and material compatibility.
* The final packaging structure should be defined according to product contents, filling conditions, intended use and targeted technical performance.
